DIY Kitchen Island is kind of simply frame which is built and made of two or more cabinets and they can be sized into any base cabinets only by changing and moving the measurement. When you decide to redesign and remodel your kitchen, at least you will need some money as your budget to buy some materials and things that will be needed for your new design, such as miter saw, drill, saw, spikes, and the likes.
To build the large thing will be daunted but those cuts may be fairly simple. Note it, that the hardest thing in this design is mitering the baseboard that will be used. This design might give you same difficulties but believe that you can design them in your own ways. Let us see the below steps.
3 Photos Gallery of: Steps of Making DIY Kitchen Island by Your Own Creativity
Steps in Designing DIY Kitchen Island Your Own
The first time, you need to cut the framing boards to be modified easily. When it is completed, set them out side by side to ensure that the cuts are in the same length and wide. Secondly, you should ensure the studs sits in vertical positions between the horizontal of top and bottom and mark the line in the same locations of each stud.
Note that when the studs are lining up with those marks might help keeping the assembly square. Thirdly, lay outing the side wall framing and next is assembling the side wall framing by applying the glue to the ends of every stud in a place and screw through horizontal to the end of every vertical stud and repeat them. The fifth is attaching the side wall panel by cutting a piece of the plywood to the all height and weight of every side wall. Lay the plywood in such place and secure it using one inch wood screw.
Repeat this step to cut and attach the next side wall’s panel. The next steps are lay outing the center wall framing and install the crosspieces. So, attaching the padding and panel, attaching the filter boards, installing end caps, adding the top rail and the last is positioning and installing the bottom rail. That is all about DIY Kitchen Island.